Welding Machines

Product Details:

Since we have established our base in this highly competitive industry, we are readily engrossed in the arena of presentingAdor Champ Mig 250 Welding Machine.

Features :

• Inverter based GMAW outfit
• High efficiency and high power factor – resulting energy saving
• Auto “Weld Stop” when welding torch is taken away from weld job
• Compatible to Power Generator Supply
• Enhanced Reliability due to SMD technology
• Digital Panel for adjusting the welding parameters
• 30% more Energy efficient than conventional machines
• Maximum Power factor is 0.93
• Excellent dynamic response enables superior arc characteristics. 2T, 4T operating modes
• Electronic choke adjustment for better arc control
• Crater voltage and Crater current adjustment through digital panel
• Unique feature of Globule Detachment to stop formation of globules at the tip of wire at the end of welding
• Automatic “Weld Stop” facility

Product Details:

Owing to our experts and rich industrial knowledge, we are keenly successful bin presenting Champ 250 Welding Machine. We offer these at reasonable rates.
 
Features :

Enhanced Reliability due to SMD technology

High frequency IGBT based Rectifier

Arc force adjustment on panel

TIG Welding possible with External HF Unit

Light weight, comp act and portable for easy handling

High efficiency

Built in Hot Start

Smooth and stable arc with minimum Spatter

Product Details:

Ador welding machine model champ t 400

So as to uphold the standing we have built up, we are engrossed in presenting a broad compilation of products 

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Riding on vast volumes of expertise in this arena, we are occupied in offering Champ 200 Welding Machine.

Features :

• Single phase inverter based, High efficiency DC Welder
• High frequency IGBT based PWM Inverter
• TIG Welding possible with Lift Arc technique
• Light weight, compact and portable for easy handling
• Compatible to power generator supply
• Intelligent protection - UV, OV, Line - 415 V, Over Temperature
• Hot start feature available
• Smooth and stable arc with minimum spatter
• TIG welding with scratch/Lift arc start
• Provided with UV, OV, Thermal and line voltage (415V) protection

Product Details:

Typical Applications :
These Energy Efficient, latest Inverter based rectifier units are suitable for Manual Metal Arc welding (SMAW) process with all general purpose and special electrodes like 7018 type etc
Ideally suitable for light, Medium and Heavy duty, all purpose industrial, structural welding applications both within shopfloor and at project sites including construction of power plants, Refineries and cement plants etc
These welding rectifiers can be also used for DC TIG welding applications by connecting suitable TIG control units (HF 2000 / 2000 AD / 3000 / 3000 AD)
Most recommended for project site applications, where easy portability/mobility, light weight compact machines are desired due to space constraints etc as well as when they are to be used at some heights above the ground level
Features :
Inverter (IGBT) based, energy efficient welding rectifiers for heavy duty structural welding applications
High power factor, high efficiency resulting energy savings up to 35% over thyristorised rectifiers
Provided with protections against Over voltage, Under Voltage, Overload and Single phasing
Welder friendly operation-Arc force adjustments provided on the front panel
Enhanced reliability due to SMD technoloy in PCB design and manufacturing
Robust mechanical construction – recommended for hostile operating conditions and heavy duty usage at project sites
Suitable for TIG welding at site by using external HF control unit like HF 2000 / HF 3000

Product Details:

In order to furnish the variegated desires of our clients, we have brought forth an extensive consignment of Ador Champ Multi MIG Welding Machine.

Features :

• CHAMP MULTI- 400 and CHAMP MULTI- 600 are Multi process welding outfits with Inverter based welding power source.
• The IGBT power module, High frequency transformer and fast recovery diode are used as key device for power conversion and transmission to assure better Efficiency and performance.
• The welding power source has both constant current (CC) and constant voltage characteristics (CV), which are suitable for MMA and MIG/MAG and FCAW applications.
• Set output parameters are constant against input supply variations.
• Power source is protected against single phasing, under voltage, over voltage, short circuit and temperature rise.
• Water cooled version available for CHAMP MULTI 600 as option.
• MMA process with this outfit is most suitable for all kinds of electrodes including CELWEL for fabrication work, pipe welding, site construction etc.
• GMAW process is suitable for welding in semiautomatic/ automatic mechanism for welding MS, SS and Al materials with Solid and Flux core wires (FCAW Mode).
• Both the models can operate with single point Synergic control in MIG/MAG mode.
• The complete system consists of Power Source, wire feeder, torch and inter connecting cables and control cables between wire feeder and power source.
• Available with both Gas cooled and Water cooled MIG Torches for 600 Amp model.
• High efficiency (>85%)
• Single point Synergic control in GMAW.
• User friendly Digital front panel and analog remote controller CHAMP MULTI- 400 and CHAMP MULTI- 600 are Multi process
• Auto “Weld Stop” when welding torch is taken away from work piece.
• 2T, 4T and SPOT and Multi Spot operating modes in MIG Mode as well as FCAW mode Dynamic Inductance adjustment in GMAW process and Arc force adjustment in MMA process for better arc control.
• Crater voltage and Crater current adjustment through digital panel.
• Unique feature of Pinch-off pulse to avoid globule formation.

Product Details:

Known for our reasonable rates, we have come up with a world class assortment of Champ 600 Welding Machine.

Typical Applications :

• These Energy Efficient, latest Inverter based rectifier units are suitable for Manual Metal Arc welding (SMAW) process with all elelctrodes including specials like 6010, 7010G and 8010G electrodes
• Ideally suitable for light, Medium and Heavy duty, all purpose industrial, structural welding applications both within shop floor and at project sites
• These welding rectifiers can be also used for DC TIG welding applications by connecting suitable TIG control units (HF 2000 / 2000 AD / 3000 / 3000 AD)
• Most recommended for project site applications where easy portability / mobility light weight compact machines are desired due to space constraints etc
• Smooth and stable arc with minimum spatter
• Suitable for Gouging Application and long distant welding
• Arc force adjustments provided on the front panel
• TIG operation possible with external HF TIG Control unit.